{"id":25250,"date":"2021-04-21T14:29:41","date_gmt":"2021-04-21T11:29:41","guid":{"rendered":"https:\/\/blog.polyurethan.ru\/?p=25250"},"modified":"2021-10-15T06:16:19","modified_gmt":"2021-10-15T03:16:19","slug":"kak-zameniti-frictionnoe-koltso","status":"publish","type":"post","link":"https:\/\/blog.polyurethan.ru\/en\/2021\/04\/21\/kak-zameniti-frictionnoe-koltso\/","title":{"rendered":"How to replace the friction ring of a snow blower"},"content":{"rendered":"\n

The weakening of the tractive effort, the slowing down of the speed, or even the absence of any movement of the snow blower – all this indicates that the friction drive is worn out.<\/p>\n\n\n\n

\"\"<\/figure>\n\n\n\n

Friction ring wear is a common drive problem in snow blowers. In our step-by-step instructions, we will tell you how to replace a worn-out part with a new one with your own hands.<\/p>\n\n\n\n

STEP 1<\/strong>
First of all, we drain the gasoline from the tank to avoid leakage from the neck. After that, on a level surface, we set the snow blower to the “service position”, by tilting it forward, we put it on the bucket (intake).<\/p>\n\n\n\n