{"id":6476,"date":"2020-04-16T07:27:23","date_gmt":"2020-04-16T04:27:23","guid":{"rendered":"https:\/\/blog.polyurethan.ru\/?p=6476"},"modified":"2025-05-26T11:51:51","modified_gmt":"2025-05-26T08:51:51","slug":"installing-problems-of-polyurethane-parts","status":"publish","type":"post","link":"https:\/\/blog.polyurethan.ru\/en\/2020\/04\/16\/installing-problems-of-polyurethane-parts\/","title":{"rendered":"What problems can you face when installing polyurethane parts?"},"content":{"rendered":"\n

A good proven car service has problems installing auto parts under the Siberian suspension brand. We are responsible for quality, as evidenced by both positive reviews about our products and regular customers in all 85 regions of Russia, in the countries of near and far abroad. However, small details in the installation should be considered in order to avoid any complications.<\/p>\n\n\n\n

With the following information, you will be protected from \u201cunexpected\u201d problems. <\/strong><\/h3>\n\n\n\n

1. The most common problem is that a car owner purchased spare parts by the name of the brand and model of the car without taking into account the VIN or body number. In 80% of cases, spare parts will not fit.<\/p>\n\n\n\n

  • \"\"<\/figure><\/li>
  • \"\"<\/figure><\/li><\/ul><\/figure>\n\n\n\n

    2. Another variant of the same problem – spare parts were purchased in accordance with the VIN or body number, but it turned out that a specific lever on the car was replaced, and the owner did not take into account its OEM! In such cases, spare parts will also not fit. Please note that OEM details are indicated on the product card on our website.<\/p>\n\n\n\n

    3. Before installation, the main dimensions were not measured, for example, sleeve length, seat dimensions. The result is that the car is disassembled, the part cannot be installed. Please note that if you are choosing a part by size, it is very important to take into account all the required dimensions. Otherwise, sizing will be incorrect. For example, for silent blocks you need to measure 4 parameters, not 3, as some people do!<\/p>\n\n\n\n

    • \"\"<\/figure><\/li>
    • \"\"<\/figure><\/li><\/ul><\/figure>\n\n\n\n

      4. Installation of silent blocks without removing the levers. Almost no one succeeds in doing it well. Hence the problems, since it is more difficult to achieve the alignment of the silent block and the seat of the lever. <\/p>\n\n\n\n

      5. Pressing in a vice. Possible problem: damage to a seat or a part. Solution: in the absence of extensive experience in working with a vice, it is better to press in on special equipment. The following video shows how the silentblock is pressed in on pressing equipment using cones.<\/p>\n\n\n\n

      \n